S690 QL(1), S960 QL, S1100 QL, S890QL and S1300

These steel grades belong to a group of fine-grained steel with high tensile strength, used in constructions where a relatively low weight is important, such as mobile hosting and lifting equipment, earthmoving machines and movable bridges.

S stands for Structural;  690, 960, 1100 and 1300 indicate the yield strength in N/mm² (MPa) for the smallest thickness range.

Q stands for Quenched. 

L indicates that the notch impact value (27 Joules) was measured at a temperature of - 40°C.

L1 indicates that the notch impact value (27 Joules) was measured at a temeprature of - 60° C.

Products of these steel grades can be delivered in the following thickneses:

• S690 QL(1) from 4 to 240 mm.
• S960 QL from 4 to 180 mm.
• S1100 QL from 4 to 20 mm. 
• S890 QL from 4 to 120 mm.
• S1300 from 4 to 10 mm.

 

Products can be delivered with 3.1 and 3.2 certificates 

 

Features

 

Steel grade	S690 QL
Material number	1.8928
Available thicknesses	4 - 240 mm
Charpy impact test value	27 Joules at -40° C
Certificate	3.1 & 3.2

Steel grade	S690 QL1
Material number	1.8988
Available thicknesses	4 - 180 mm
Charpy impact test value	27 Joules at -60° C
Certificate	3.1 & 3.2

Steel grade	S960 QL
Material number	1.8933
Available thicknesses	4 - 180 mm
Charpy impact test value	27 Joules at -40° C
Certificate	3.1 & 3.2

Steel grade	S960 QL1
Material number	1.8934
Available thicknesses	4 - 180 mm
Charpy impact test value	27 Joules at -60° C
Certificate	3.1 & 3.2

Steel grade	S890QL
Material number	1.8983
Available thicknesses	4 - 120 mm
Charpy impact test value	27 Joules at -40° C
Certificate	3.1 & 3.2

Steel grade	S1100
Material number	1.8942
Available thicknesses	4 - 20 mm
Charpy impact test value	27 Joules at -40° C
Certificate	3.1 & 3.2

Steel grade	S1300
Available thicknesses	4 - 10 mm
Charpy impact test value	27 Joules at -40° C
Certificate	3.1 & 3.2

BACK TO PREVIOUS PAGE